This week we are pleased to be introducing parts to fit recent BMW 5 and 6 series F model platforms, including xDrive and M variants.

F10, F11 5 Series (2010 – 2016)
F06, F12, F13 6 Series (2011 – )

For the front of the vehicle we are offering three parts to target commonly replaced radius arm bushes. Once worn, the OE rubber bush allows for instability under braking, increased tyre wear and steering vagueness. Our bush solves all 3 problems.

We have also included parts with caster offset for more precise geometry alignment and control.

RWD Vehicles (ex M5 & M6):
PFF5-6001 Front Radius Arm to Chassis Bush
PFF5-6001G Front Radius Arm to chassis Bush Caster Offset

xDrive Vehicles:
PFF5-6101 Front Radius Arm to Chassis Bush
PFF5-6101G Front Radius Arm to Chassis Bush Caster Offset

M5 & M6:
PFF5-6201 Front Radius Arm to Chassis Bush
PFF5-6201G Front Radius Arm to Chassis Bush Caster Offset

These parts are also available in our Black Series range for those looking for a Track/Competition option.

This week we are adding new vehicle listings and parts to fit the following Fiat C2 platform based models:

Fiat Bravo (2007 – )
Fiat Stilo (2001 – 2010)
Lancia Delta Gen 3 (2008 – 2014)

These parts have been called for by a number of our European dealers who report of frequent failures of original bushes, with particular emphasis on the rear beam bush. With this in mind, we are pleased to be able to supply the following parts:

PFF16-701 Front Wishbone Front Bush

PFF16-702 Front Wishbone Rear Bush

PFR16-710 Rear Beam Mounting Bush

These parts are also available in our Black Series range for those looking for a Track/Competition option.

This week we are introducing two new parts to fit a range of Toyota and Lexus MPV and SUV vehicles, popular in Asian and European markets. These vehicles include,

Toyota Alphard/Vellfire 20/25 (2008-2015)
Toyota Alphard/Vellfire 30 (2015-)
Toyota Harrier (2013-)
Toyota RAV4/Vanguard (2006-2013)
Toyota Previa/Estima/Tarago (2006-)
Lexus NX (2014-)

PFF76-701 Front Wishbone Front Bush

PFF76-702 Front Wishbone Rear Bush

Covered by our Lifetime Warranty, these parts are a cost-effective replacement to address common bush failures on these models. Worn front suspension bushes lead to braking instability, imprecise steering, and uneven tyre wear.

Finally, I hear you say! Powerflex are making suspension bushes for Mercedes Benz vehicles, and this week we are releasing products to fit vehicles with the following Mercedes model codes,

C Class W202 (1994 – 2000)
CLK W208/C208 (1998 – 2002)
SLK R170 (1998 – 2004)

PFF40-601 Front Track Control Arm Front Bush
PFF40-602 Front Track Control Arm Rear Bush

Our range of Mercedes products will be increasing over the coming months. If you have any particular requirements, please do not hesitate to contact us.

Don’t forget, fitting Powerflex doesn’t just have to be as a performance upgrade. Our products are now commonly fitted as a fit and forget replacement solution with the added benefit of our Lifetime Warranty.

Worn front suspension bushes lead to braking instability, imprecise steering, and uneven tyre wear. All common problems on normal vehicles. Replacing old rubber bushes with Powerflex is the solution.

These parts are also available in our Black Series range for those looking for a Track/Competition option.

Following the recent launch and popularity of our parts for the VAG MLB platform based vehicles, this week we are adding 

two new size option parts to fit the following vehicles:

A4 / S4 inc Quattro B8 (2008 – 2016)

A5 / S5 Inc Quattro (2007 – 2016)

Q5 Quattro (2008 – 2017)

PFF3-802 Front Lower Radius Arm to Chassis Bush

PFF3-802G Front Lower Radius Arm to Chassis Bush Caster Adjustable – featuring on-car caster adjustment for more 

precise geometry alignment and control.

These new part numbers fit arms with a 65mm diameter bush, whereas our existing PFF3-702 and PFF3-702G bushes 

replace 75mm diameter bushes.

These parts are also available in our Black Series range for those looking for a Track/Competition option.

This week we are adding, even more, engine and transmission mounting parts to our listing for the Vauxhall Corsa C and Meriva models.

This insert and bushes help to improve power delivery and gear shifting by reducing excess engine and transmission movement.

PFF80-1031 ENGINE MOUNT INSERT RIGHT SIDE is a clever two-piece design that fits into the OE rubber mount to reduce movement.

PFF80-1032 REAR LOWER ENGINE MOUNT REAR BUSH

PFF80-1034 REAR LOWER ENGINE MOUNT FRONT BUSH

PFF80-1035 FRONT LOWER ENGINE MOUNT BUSH

These parts are a more affordable solution to replacing old worn out engine mounts and rubber bushes.

These parts are also available in our Black Series range for those looking for a Track/Competition option.

This week we are adding bushes for the VW Golf Mk2, Jetta Mk2, Corrado & Golf Mk3 fitted with Eibach anti-roll bar upgrade kits.

The following bushes are developed by us to specifically fit the 22mm front and 25mm rear bar upgrade kits.

PFF85-205-22 FRONT ANTI-ROLL BAR BUSH EIBACH 22MM is already available on our listing and fits the Eibach supplied size 22mm bar.

PFR85-212 REAR ANTI-ROLL BAR TO BEAM BUSH EIBACH is designed to fit at the end of the Eibach anti-roll bar where it bolts to the rear beam.

PFR85-225-25 REAR ANTI-ROLL BAR BUSH EIBACH 25MM is designed for the 25mm rear bar. Used with the brackets supplied in the Eibach kit, this bush mounts the bar onto the rear beam.

These parts are also available in our Black Series Range for those looking for a Track/Competition option.

This week we are adding to our range of parts for the Peugeot 306 whilst adding additional vehicles to our catalogue the 

Peugeot Partner/Ranch, Citroën Berlingo, Xsara and ZX.

PFF50-303-17, 18, 19, 21 & 22 FRONT ANTI ROLL BAR BUSH comes in the four sizes for the range of anti-roll bars supplied 

by Peugeot and Citroën.

Our polyurethane mounting bushes are resilient to wear, come with our grease retention feature in the bore and improve the 

location of the bar whilst reducing body roll. They are the ideal replacement for worn rubber bushes prone to knocking.

PFF50-303-* is an ideal part to sell with PFF50-302 FRONT ARM REAR ANTI-LIFT CASTER BUSH as the anti roll bar bush 

bracket has to be removed to fit the front arm rear bush.

These parts are also available in our Black Series Range for those looking for a Track/Competition option.